DYNOmite Motorcycle & ATV Dynamometer Specifications 
 
 

Home
Back (up)
Contact us
Contents
Search
-------------------------------
Data Electronics
Pricing

Land & Sea

(603) 226-DYNO

Click to Dynamometer Comparisons page.*Absorber capacities are RPM dependant. Water brakes require a minimum water flow of 1 gpm @ 30+ psi for every 20 continuous Hp.

"Call Land & Sea, Inc. at (603) 226-3966 for approximate power limits of specific configurations."


 

Click to Dyno Tech Talk page.

DYNOmite Data-Acquisition Computer:

Expandable, surface mount, board system runs on 120-volt 60-Hz AC, 240-volt 50-Hz AC, or 12-volt DC
“Pro” PC based 28, 56 or 112+ channel capable board sets, require DYNO-MAX software
“Lite” 3-channel (upgradeable to “Pro” above)
Up to 1,000 recordings per second (per channel)
Quick disconnect data harness
Non-volatile set-up memory
“Smart Record” automated recorder triggering
RS-232 or USB output to a PC or laptop with DYNO-MAX 2000 software option 

Torque Transducer:

1% of full scale typical accuracy
Environmentally sealed strain gauge
Semi-automatic zero offset calibration
Temperature compensated

Hp Capacity** (traction limited):

**Approximate; limited primarily by tire safety and traction - higher torque transfer requires tie towns. Continuous capacities depend on selected absorber and test speed.
5 to 500+ inertial Hp (5 to 200+ continuous Hp with 9" water brake absorber)

MPH Range (tire limited):

10 - 200 MPH

Engine Tachometer:

0 - 32,000+ RPM display
Quartz crystal calibrated
RPM pulse type is selectable from ½ to 12 pulses per revolution
“Clamp-on” inductive pick-up (standard)

Dyno Speedometer:

0.0 - 255.0 MPH display
Quartz crystal calibrated
Magnetic RPM/MPH pick-up (standard)

Load Control (absorption units only):

Electronic Auto-Load (with road simulation)

Absorber (except inertia-only models):

Standard - 9" toroidal flow water brake absorber
Optional - fast response eddy current absorber
CNC machined from aircraft aluminum
Dual heavy-duty sealed bearings
Stainless steel, heat treated arbor shaft
Adjustable load characteristics
External Zerk grease fittings
Optional “Auto-Lube” kit

Roller Frame:

Heavy-duty structural, tubular, and custom rolled, steel frame with diamond plate deck
Adjustable (to 84" extended) front tire stop
Electric actuator and auto-clamping (optional)
Removable roll-up ramp(s)
Leveling vibration pads
Mobile - with integral casters on ATV models
Greaseable bearings

Roller:

16" diameter - maintains low profile deck height without damaging tires
Motorcycle/ATV models - 50"W wide roll
inertia-only motorcycle models - 25" width
Formula SAE models - 64" extra wide roll
Machined in “traction grooves” for maximum grip and tire life under high power testing
Medium inertia (to allow absorber simulations)